LC4384C-75T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384C-75T176I Overview
A mobile phone network consists of 384macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 176-LQFP package.As you can see, this device has 128 I/O ports programmed into it.There are 176 terminations programmed into the device.The terminal position of this electrical component is QUAD.The power supply voltage is 1.8V.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.The ispMACH? 4000Cseries FPGA is one of these types.Chips are programmed with 176 pins.If you use this device, you will also find [0].LC4384contains its related parts.For high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].A maximum supply voltage of 1.95Vis used in its operation.The minimal supply voltage is 1.65V.There are 24 logic elements or blocks present.Programmable I/Os are counted up 48.It is recommended that the maximum frequency be less than 322MHz.To detect input signals, there are 4 dedicated inputs.
LC4384C-75T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4384C-75T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-75T176I CPLDs applications.
- Battery operated portable devices
- I/O expansion
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- INTERRUPT SYSTEM
- Dedicated input registers
- STANDARD SERIAL INTERFACE UART
- Page register
- Portable digital devices
- Timing control
- Synchronous or asynchronous mode
