LC4384V-35T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 3.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384V-35T176C Overview
There are 384 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.A 176-LQFP package contains the item.The device has 128inputs and outputs.It is programmed that device terminations will be 176 .This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Chips should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000V series.Chips are programmed with 176 pins.It is also characterized by YES.You can find its related parts in the [0].High efficiency requires the supply voltage to be maintained at [0].In this case, EEPROMwill be used to store the data.Surface Mountmounts this electronic component.The device is designed with pins [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.Initially, it requires a voltage of 3Vas the minimum supply voltage.In total, there are 48programmable I/Os.322MHzis the maximum frequency.The status of input signals is determined by 4dedicated inputs.A fundamental building block of logic consists of 24logic elements/cells.
LC4384V-35T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4384V-35T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4384V-35T176C CPLDs applications.
- DMA control
- Page register
- Portable digital devices
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Multiple DIP Switch Replacement
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- D/T registers and latches
- PULSE WIDTH MODULATION (PWM)
- Dedicated input registers
- Wide Vin Industrial low power SMPS
