LC4384V-5T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384V-5T176C Overview
384macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 176-LQFP package contains the item.It is programmed with 128 I/Os.There are 176 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 3.3Vprovides power to the device.This part is part of the family [0].Package the chip by Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4000Vseries, it is a type of FPGA.With 176pins programmed, the chip is ready to use.It is also characterized by YES.The LC4384can be used to identify its related parts.Optimal efficiency requires a supply voltage of [0].In this case, EEPROMwill be used to store the data.Surface Mountis used to mount this electronic component.There are 176 pins embedded in the device.With a maximum supply voltage of [0], it operates.Despite its minimal supply voltage of [0], it is capable of operating.There are 24 logic elements or blocks present.A programmable I/O count of 48 has been recorded.It is important to make sure that the maximum frequency is less than 322MHz.The status of input signals is detected by 4dedicated inputs.
LC4384V-5T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4384V-5T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4384V-5T176C CPLDs applications.
- Timing control
- Auxiliary Power Supply Isolated and Non-isolated
- PLC analog input modules
- Protection relays
- Voltage level translation
- Address decoders
- Software-Driven Hardware Configuration
- Page register
- POWER-SAVING MODES
- Wide Vin Industrial low power SMPS
