LC4384V-75TN176C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4384V-75TN176C Overview
There are 384 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the 176-LQFPpackage, you will find it.There are 128 I/Os programmed in it.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 3.3V is used as the power supply for this device.It belongs to the family [0].The chip should be packaged by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.It is a type of FPGA belonging to the ispMACH? 4000V series.Chips are programmed with 176 pins.If this device is used, you will also be able to find [0].The LC4384shows its related parts.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is recommended to store data in [0].Surface Mountmounts this electronic component.This board has 176 pins.A maximum supply voltage of 3.6Vis used in its operation.A minimum supply voltage of 3V is required for it to operate.A logic element or block has 24elements.There are a total of 48 Programmable I/Os.This frequency can be achieved at 178.57MHz.Input signals are detected by 4dedicated inputs.As a fundamental building block, there are 36 logic elements/cells.
LC4384V-75TN176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4384V-75TN176C Applications
There are a lot of Lattice Semiconductor Corporation LC4384V-75TN176C CPLDs applications.
- Storage Cards and Storage Racks
- I2C BUS INTERFACE
- Wide Vin Industrial low power SMPS
- Code converters
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Dedicated input registers
- Custom state machines
- INTERRUPT SYSTEM
- Portable digital devices
- State machine design
