LC4512B-10FTN256I
| Parameters | |
|---|---|
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4512 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 208 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
LC4512B-10FTN256I Overview
There are 512 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 256-LBGA package containing it.There are 208 I/Os on the board.There is a 256terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 2.5V.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Surface Mountshould be used for mounting the chip.The ispMACH? 4000Bseries comprises this type of FPGA.There are 256pins on the chip.This device also displays [0].There are related parts in [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis the mounting point of this electronic part.The 256pins are designed into the board.In this case, the maximum supply voltage is 2.7V.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.In total, there are 32 logic elements/blocks.It is recommended not to exceed 125MHzin terms of frequency.A total of 4dedicated inputs are available for detecting the status of input signals.
LC4512B-10FTN256I Features
256-LBGA package
208 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC4512B-10FTN256I Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-10FTN256I CPLDs applications.
- Interface bridging
- Configurable Addressing of I/O Boards
- I2C BUS INTERFACE
- DMA control
- USB Bus
- Code converters
- Cross-Matrix Switch
- STANDARD SERIAL INTERFACE UART
- Custom shift registers
- Address decoding
