LC4512B-10T176I
| Parameters | |
|---|---|
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 322MHz |
LC4512B-10T176I Overview
In the mobile phone network, there are 512macro cells, which are cells with high-power antennas and towers.The product is contained in a 176-LQFP package.This device has 128 I/O ports programmed into it.It is programmed that device terminations will be 176 .The terminal position of this electrical component is QUAD.The power supply voltage is 2.5V.It is a part of the family [0].Ideally, the chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.It is equipped with 176 pin count.It is also possible to find YESwhen using this device.According to the LC4512, its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].Surface Mountis used to mount this electronic component.There are 176pins on it.A maximum voltage of 2.7Vis required for operation.Despite its minimal supply voltage of [0], it is capable of operating.A total of 32logic elements/blocks are present.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the maximum frequency be less than 322MHz.The input signals are detected by 4dedicated inputs.
LC4512B-10T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512B-10T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-10T176I CPLDs applications.
- Software-driven hardware configuration
- USB Bus
- Multiple Clock Source Selection
- Protection relays
- Power automation
- POWER-SAVING MODES
- LED Lighting systems
- Pattern recognition
- Wide Vin Industrial low power SMPS
- Auxiliary Power Supply Isolated and Non-isolated
