LC4512B-10TN176I
| Parameters | |
|---|---|
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
LC4512B-10TN176I Overview
The mobile phone network has 512 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a 176-LQFP package.The device is programmed with 128 I/Os.There is a 176terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5Vprovides power to the device.It is a part of the family [0].It is packaged in the way of Tray.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Bseries FPGA.In this chip, the 176pins are programmed.It is also characterized by YES.Its related parts can be found in the [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.176pins are included in its design.A maximum supply voltage of 2.7Vis used in its operation.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.In total, there are 44programmable I/Os.It is important to make sure that the maximum frequency is less than 322MHz.The status of input signals is detected by 4dedicated inputs.There are 32 logic elements/cells to form a fundamental building block.
LC4512B-10TN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512B-10TN176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-10TN176I CPLDs applications.
- I/O expansion
- Battery operated portable devices
- INTERRUPT SYSTEM
- Power Meter SMPS
- Custom shift registers
- Multiple Clock Source Selection
- Preset swapping
- Wide Vin Industrial low power SMPS
- Reset swapping
- Complex programmable logic devices
