LC4512B-35T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 3.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512B-35T176C Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 128 I/Os on the board.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.As a result, it is packaged as Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.The chip should be mounted by Surface Mount.The ispMACH? 4000Bseries comprises this type of FPGA.It is programmed with 176 pins.This device can also display [0].The LC4512indicates that its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].A maximum voltage of 2.7Vis required for operation.The device is designed to operate with a minimal supply voltage of 2.3VV.Programmable I/Os are counted up 100.It is recommended that the maximal frequency be lower than 322MHz.A total of 4dedicated inputs are available for the purpose of detecting input signals.An elementary building block consists of 32logic elements/cells.
LC4512B-35T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4512B-35T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-35T176C CPLDs applications.
- Multiple Clock Source Selection
- Bootloaders for FPGAs
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Pattern recognition
- TIMERS/COUNTERS
- USB Bus
- Reset swapping
- Address decoders
- Preset swapping
- Auxiliary Power Supply Isolated and Non-isolated
