LC4512B-5F256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 208 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
LC4512B-5F256C Overview
In the mobile phone network, there are 512macro cells, which are cells with high-power antennas and towers.There is a 256-BGA package containing it.The device is programmed with 208 I/Os.It is programmed that device terminations will be 256 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.A voltage of 2.5V is used as the power supply for this device.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000B series.With 256pins programmed, the chip is ready to use.This device also displays [0].The LC4512contains its related parts.High efficiency requires a voltage supply of [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.It operates with the maximal supply voltage of 2.7V.With a minimal supply voltage of [0], it operates.There are 44 programmable I/Os in this system.It is important to make sure that the maximum frequency is less than 322MHz.A total of 4dedicated inputs are available for detecting the status of input signals.An elementary building block consists of 32logic elements/cells.
LC4512B-5F256C Features
256-BGA package
208 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
LC4512B-5F256C Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-5F256C CPLDs applications.
- Address decoders
- Dedicated input registers
- Multiple DIP Switch Replacement
- ON-CHIP OSCILLATOR CIRCUIT
- Configurable Addressing of I/O Boards
- Programmable polarity
- Handheld digital devices
- Software-Driven Hardware Configuration
- Bootloaders for FPGAs
- Battery operated portable devices
