LC4512B-75F256I
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 208 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
LC4512B-75F256I Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is enclosed in a 256-BGA package.As a result, it has 208 I/O ports programmed.There is a 256terminations set on devices.This electrical part has a terminal position of BOTTOMand is connected to the ground.An electrical supply voltage of 2.5V is used to power it.It is a part of family [0].It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Surface Mounton the chip.This type of FPGA is a part of the ispMACH? 4000B series.A chip with 256pins is programmed.When using this device, YESis also available.According to the LC4512, its related parts can be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.Surface Mountis the mounting point of this electronic part.In this case, the maximum supply voltage is 2.7V.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. The maximum frequency should not exceed 322MHz.Input signals are detected using 4dedicated inputs.In order to form a fundamental building block, there are 32 logic elements or cells.
LC4512B-75F256I Features
256-BGA package
208 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4512B-75F256I Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-75F256I CPLDs applications.
- Address decoders
- Reset swapping
- I/O PORTS (MCU MODULE)
- PLC analog input modules
- Power up sequencing
- Voltage level translation
- Field programmable gate
- Protection relays
- I/O expansion
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
