LC4512B-75FT256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 208 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 178.57MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512B-75FT256I Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 256-LBGApackage, you will find it.The device has 208inputs and outputs.It is programmed that device terminations will be 256 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5V is used as the power supply for this device.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispMACH? 4000B series.It is programmed with 256 pins.The device can also be used to find [0].The LC4512indicates that related parts can be found.High efficiency requires a voltage supply of [0].It is adopted to store data in [0].Surface Mountis used to mount this electronic component.The device has a pinout of [0].A maximum voltage of 2.7Vis required for operation.In order for it to operate, a supply voltage of 2.3Vis required.There are 32 logic elements/blocks.There should be a lower maximum frequency than 178.57MHz.The status of input signals is detected by 4dedicated inputs.
LC4512B-75FT256I Features
256-LBGA package
208 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC4512B-75FT256I Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-75FT256I CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Voltage level translation
- STANDARD SERIAL INTERFACE UART
- Parity generators
- Software-Driven Hardware Configuration
- White goods (Washing, Cold, Aircon ,...)
- Code converters
- Synchronous or asynchronous mode
- Power Meter SMPS
- Portable digital devices
