LC4512C-10T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 4mA |
| Number of I/O | 128 |
| Nominal Supply Current | 4mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512C-10T176I Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 176-LQFP package containing it.As a result, it has 128 I/O ports programmed.There is a 176terminations set on devices.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 1.8Vprovides power to the device.It is a part of the family [0].Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.It is a type of FPGA belonging to the ispMACH? 4000C series.In this chip, the 176pins are programmed.It is also possible to find YESwhen using this device.The LC4512indicates that its related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 1.95V.The device is designed to operate with a minimal supply voltage of 1.65VV.There are 32 logic elements or blocks present.A programmable I/O count of 44 has been recorded.It is recommended that the maximal frequency be lower than 322MHz.Input signals are detected using 4dedicated inputs.
LC4512C-10T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512C-10T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512C-10T176I CPLDs applications.
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
- Digital designs
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoding
- Software-Driven Hardware Configuration
- Bootloaders for FPGAs
- USB Bus
- ToR/Aggregation/Core Switch and Router
- Protection relays
