LC4512C-35T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 4mA |
| Number of I/O | 128 |
| Nominal Supply Current | 4mA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 3.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512C-35T176C Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).176-LQFPis the package in which it resides.The device is programmed with 128 I/O ports.176terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 1.8V.This part is part of the family [0].Package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the ispMACH? 4000C series.A chip with 176pins is programmed.This device can also display [0].The LC4512contains its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.There are 176pins on it.This device operates at a voltage of 1.95V when the maximum supply voltage is applied.With a minimal supply voltage of [0], it operates.There are 44 programmable I/Os in this system.It should be below 322MHzat the maximal frequency.To detect input signals, there are 4 dedicated inputs.A fundamental building block consists of 32logic elements/cells.
LC4512C-35T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4512C-35T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4512C-35T176C CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- Power Meter SMPS
- Field programmable gate
- Cross-Matrix Switch
- Software Configuration of Add-In Boards
- DMA control
- White goods (Washing, Cold, Aircon ,...)
- Code converters
- Configurable Addressing of I/O Boards
- Address decoding
