LC4512C-5T176I
| Parameters | |
|---|---|
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 4mA |
| Number of I/O | 128 |
| Nominal Supply Current | 4mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
LC4512C-5T176I Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 176-LQFP package.It is equipped with 128I/O ports.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.The power supply voltage is 1.8V.It belongs to the family [0].It is packaged in the way of Tray.To ensure reliability, the device operates at a temperature of [0].The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000C series.Chips are programmed with 176 pins.It is also possible to find YESwhen using this device.The LC4512indicates that its related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.It is designed with 176 pins.This device operates at a voltage of 1.95Vas its maximum supply voltage.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.A total of 48programmable I/Os are available.It is recommended that the maximal frequency be lower than 322MHz.There are 4 dedicated inputs used to detect the status of input signals.A fundamental building block of logic consists of 32logic elements/cells.
LC4512C-5T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512C-5T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512C-5T176I CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Software-Driven Hardware Configuration
- Field programmable gate
- Bootloaders for FPGAs
- Programmable polarity
- PLC analog input modules
- Multiple DIP Switch Replacement
- Custom shift registers
- Power up sequencing
- Interface bridging
