LC4512C-75TN176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 4mA |
| Number of I/O | 128 |
| Nominal Supply Current | 4mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4512C-75TN176C Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is contained in package [0].In this case, there are 128 I/Os programmed.There are 176 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 1.8V is used as the power supply for this device.It is included in Programmable Logic Devices.It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].Mount the chip by Surface Mount.As part of the ispMACH? 4000Cseries, it is a type of FPGA.A chip with 176pins is programmed.It is also characterized by YES.In accordance with the [0], its related parts are listed.If high efficiency is desired, the supply voltage should be kept at [0].For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.There are 176 pins embedded in the device.A maximum voltage of 1.95Vis required for operation.The minimal supply voltage is 1.65V.There are 32 logic elements or blocks present.Programmable I/Os are counted up 48.It is possible to achieve a frequency of 178.57MHz.The status of input signals is detected by 4dedicated inputs.Fundamental building blocks consist of 36logic elements/cells.
LC4512C-75TN176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4512C-75TN176C Applications
There are a lot of Lattice Semiconductor Corporation LC4512C-75TN176C CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Page register
- Synchronous or asynchronous mode
- Storage Cards and Storage Racks
- Interface bridging
- Wide Vin Industrial low power SMPS
- Code converters
- I/O expansion
- Software Configuration of Add-In Boards
- State machine design
