LC4512V-35FN256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 384.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4512 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 208 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
LC4512V-35FN256C Overview
512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].This device has 208 I/O ports programmed into it.There is a 256terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 3.3V.This part is part of the family [0].It is packaged in the way of Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.It belongs to the ispMACH? 4000Vseries of FPGAs.It is equipped with 256 pin count.If this device is used, you will also be able to find [0].The LC4512can be used to identify its related parts.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.It is designed with 256 pins.A maximum voltage of 3.6Vis required for operation.Normally, it operates with a voltage of 3VV as its minimum supply voltage.In total, there are 32 logic elements/blocks.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is possible to achieve a frequency of 384.6MHz.The input signals are detected by 4dedicated inputs.A fundamental building block of logic consists of 36logic elements/cells.
LC4512V-35FN256C Features
256-BGA package
208 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
256 pins
LC4512V-35FN256C Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-35FN256C CPLDs applications.
- Configurable Addressing of I/O Boards
- INTERRUPT SYSTEM
- Multiple DIP Switch Replacement
- Custom shift registers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable polarity
- Power Meter SMPS
- Bootloaders for FPGAs
- Protection relays
- STANDARD SERIAL INTERFACE UART
