LC4512V-35T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 384.6MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512V-35T176C Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 176-LQFPpackage, you will find it.It is programmed with 128 I/Os.There are 176 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The device is powered by a voltage of 3.3V volts.It is a part of the family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the ispMACH? 4000Vseries of FPGAs.In this chip, the 176pins are programmed.It is also possible to find YESwhen using this device.The LC4512contains its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.The device is designed with pins [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.With a minimal supply voltage of [0], it operates.There are 32 logic elements or blocks present.A programmable I/O count of 100 has been recorded.In this case, 384.6MHzis the frequency that can be achieved.To detect input signals, there are 4 dedicated inputs.There are 36 logic elements/cells on the device.
LC4512V-35T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4512V-35T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-35T176C CPLDs applications.
- DDC INTERFACE
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- Interface bridging
- ON-CHIP OSCILLATOR CIRCUIT
- INTERRUPT SYSTEM
- Discrete logic functions
- DMA control
- State machine design
- Battery operated portable devices
