LC4512V-5T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512V-5T176C Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 176-LQFP package.As a result, it has 128 I/O ports programmed.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.There is 3.3V voltage supply for this device.This part is part of the family [0].It is recommended that the chip be packaged by Tray.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000V series.With 176pins programmed, the chip is ready to use.If this device is used, you will also be able to find [0].The LC4512shows its related parts.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.EEPROM is adopted for storing data.This device is mounted by Surface Mount.This board has 176 pins.A maximum voltage of 3.6Vis required for operation.It is powered by 3Vas its minimum supply voltage.32logic blocks/elements are present.There are 100 Programmable I/Os.You can achieve 227.27MHzfrequencies.The status of input signals is detected by 4dedicated inputs.A fundamental building block consists of 36logic elements/cells.
LC4512V-5T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4512V-5T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-5T176C CPLDs applications.
- DDC INTERFACE
- Interface bridging
- DMA control
- Wide Vin Industrial low power SMPS
- Boolean function generators
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- PLC analog input modules
- Software-Driven Hardware Configuration
- Complex programmable logic devices
- Software Configuration of Add-In Boards
