LC4512V-5T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512V-5T176I Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 176-LQFP package containing it.The device has 128inputs and outputs.There are 176 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 3.3V volts.This part is part of the family [0].Package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispMACH? 4000V series.A chip with 176pins is programmed.If you use this device, you will also find [0].LC4512contains its related parts.Optimal efficiency requires a supply voltage of [0].In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.A total of 176pins are provided on this board.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 3Vis required.This logic element/block contains 32logic elements.There are 44 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There is a maximum frequency of 227.27MHz.The input signals are detected by 4dedicated inputs.In order to form a fundamental building block, there are 36logic elements/cells.
LC4512V-5T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512V-5T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-5T176I CPLDs applications.
- Protection relays
- Boolean function generators
- Programmable polarity
- USB Bus
- Timing control
- ToR/Aggregation/Core Switch and Router
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Complex programmable logic devices
- Multiple Clock Source Selection
- Reset swapping
