LC4512V-5TN176I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4512V-5TN176I Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 176-LQFP package.The device has 128inputs and outputs.176terminations have been programmed into the device.QUADis the terminal position of this electrical part.There is 3.3V voltage supply for this device.There is a part in the family [0].As a result, it is packaged as Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.The ispMACH? 4000Vseries comprises this type of FPGA.It is programmed with 176 pins.Additionally, this device is capable of displaying [0].Its related parts can be found in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].In general, it is recommended to store data in [0].Surface Mountis used to mount this electronic component.There are 176 pins on the device.It operates at a maximum supply voltage of 3.6V volts.In order for it to operate, a supply voltage of 3Vis required.This logic element/block contains 32logic elements.A programmable I/O count of 48 has been recorded.It is recommended that the maximum frequency be less than 322MHz.The status of input signals is determined by 4dedicated inputs.
LC4512V-5TN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512V-5TN176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-5TN176I CPLDs applications.
- POWER-SAVING MODES
- ON-CHIP OSCILLATOR CIRCUIT
- Programmable polarity
- Parity generators
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Voltage level translation
- I/O PORTS (MCU MODULE)
- Software Configuration of Add-In Boards
- Interface bridging
- Address decoders
