LC4512V-75TN176I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4512V-75TN176I Overview
This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 176-LQFP.The device is programmed with 128 I/O ports.There are 176 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 3.3V is used to power it.It is a part of family [0].Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.It belongs to the ispMACH? 4000Vseries of FPGAs.Chips are programmed with 176 pins.If this device is used, you will also be able to find [0].According to the LC4512, its related parts can be found.The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].In this case, it is mounted by Surface Mount.The 176pins are designed into the board.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 3Vis required.This logic element/block contains 32logic elements.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. You can achieve 178.57MHzfrequencies.In its simplest form, it consists of 36 logic blocks (LABs).Input signals are detected using 4dedicated inputs.
LC4512V-75TN176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
36 logic blocks (LABs)
LC4512V-75TN176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512V-75TN176I CPLDs applications.
- Bootloaders for FPGAs
- Synchronous or asynchronous mode
- I/O PORTS (MCU MODULE)
- I2C BUS INTERFACE
- LED Lighting systems
- Multiple Clock Source Selection
- Digital systems
- INTERRUPT SYSTEM
- ON-CHIP OSCILLATOR CIRCUIT
- Programmable polarity
