LC51024MV-52FN484C
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 277MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC51024 |
| Pin Count | 484 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 88kB |
| Operating Supply Current | 75mA |
| Number of I/O | 317 |
| Nominal Supply Current | 75mA |
| RAM Size | 64kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 5.2 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1024 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| Radiation Hardening | No |
LC51024MV-52FN484C Overview
The mobile phone network has 1024 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a 484-BBGA package containing it.This device has 317 I/O ports programmed into it.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.It operates with the operating temperature of 0°C~90°C TJ to ensure its reliability.It is recommended that Surface Mountholds the chip in place.It is a type of FPGA belonging to the ispXPLD? 5000MV series.With 484pins programmed, the chip is ready to use.This device is also capable of displaying [0].In accordance with the [0], its related parts are listed.The supply voltage should be maintained at 3.3V for high efficiency.In this case, EEPROM, SRAMwill be used to store the data.Surface Mountmounts this electronic component.There are 484pins on it.A maximum supply voltage of 3.6Vis used in its operation.A minimum supply voltage of 3V is required for it to operate.There are 100 programmable I/Os in this system.In this case, 277MHzis the frequency that can be achieved.An elementary building block consists of 32logic elements/cells.The devices embed a memory of 88kB available for storing programs and datas.
LC51024MV-52FN484C Features
484-BBGA package
317 I/Os
The operating temperature of 0°C~90°C TJ
484 pin count
484 pins
LC51024MV-52FN484C Applications
There are a lot of Lattice Semiconductor Corporation LC51024MV-52FN484C CPLDs applications.
- Custom state machines
- Parity generators
- LED Lighting systems
- Wide Vin Industrial low power SMPS
- Synchronous or asynchronous mode
- Address decoding
- Multiple Clock Source Selection
- Boolean function generators
- Dedicated input registers
- Address decoders
