LC51024VG-12F676I
| Parameters | |
|---|---|
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC51024 |
| Pin Count | 676 |
| Qualification Status | Not Qualified |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 88kB |
| Operating Supply Current | 380mA |
| Number of I/O | 384 |
| Nominal Supply Current | 380mA |
| Memory Type | ROMless |
| Propagation Delay | 12 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1024 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 12ns |
| Height Seated (Max) | 2.6mm |
| Length | 31mm |
| Width | 31mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 676-BBGA |
| Number of Pins | 676 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH™ 5000VG |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 676 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
LC51024VG-12F676I Overview
1024 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a 676-BBGA package.It is programmed with 384 I/Os.There are 676 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ispMACH? 5000VGseries comprises this type of FPGA.676pins are programmed on the chip.This device is also capable of displaying [0].LC51024contains its related parts.In this case, ROMlesswill be used to store the data.Surface Mountmounts this electronic component.A total of 676pins are provided on this board.This device operates at a voltage of 3.6Vas its maximum supply voltage.A minimum supply voltage of 3V is required for this device to operate.There are 100 Programmable I/Os.It is recommended not to exceed 250MHzin terms of frequency.There are 32 logic elements/cells to form a fundamental building block. The devices contain a memory of 88kBthat can be used to store programs and data.
LC51024VG-12F676I Features
676-BBGA package
384 I/Os
The operating temperature of -40°C~105°C TJ
676 pin count
676 pins
LC51024VG-12F676I Applications
There are a lot of Lattice Semiconductor Corporation LC51024VG-12F676I CPLDs applications.
- Power Meter SMPS
- Synchronous or asynchronous mode
- Field programmable gate
- I2C BUS INTERFACE
- Wide Vin Industrial low power SMPS
- Programmable polarity
- Software Configuration of Add-In Boards
- Boolean function generators
- Software-driven hardware configuration
- State machine control
