LC51024VG-5F484C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH™ 5000VG |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC51024 |
| Pin Count | 484 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 88kB |
| Operating Supply Current | 380mA |
| Number of I/O | 304 |
| Nominal Supply Current | 380mA |
| Memory Type | ROMless |
| Propagation Delay | 5 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1024 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | Non-RoHS Compliant |
LC51024VG-5F484C Overview
Currently, there are 1024 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.484-BBGAis the package in which it resides.As you can see, this device has 304 I/O ports programmed into it.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 3.3V.There is a part included in Programmable Logic Devices.Package the chip by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It belongs to the ispMACH? 5000VGseries of FPGAs.A chip with 484pins is programmed.The device can also be used to find [0].In accordance with the [0], its related parts are listed.If high efficiency is desired, the supply voltage should be kept at [0].ROMless is adopted for storing data.This electronic part is mounted in the way of Surface Mount.There are 484 pins on the device.A voltage of 3.6V is the maximum supply voltage for this device.A minimum supply voltage of 3V is required for this device to operate.This logic element/block contains 32logic elements.There are a total of 48 Programmable I/Os.It is recommended that the maximal frequency be lower than 250MHz.Devices include a memory of 88kBavailable for the storage of programs and data.
LC51024VG-5F484C Features
484-BBGA package
304 I/Os
The operating temperature of 0°C~90°C TJ
484 pin count
484 pins
LC51024VG-5F484C Applications
There are a lot of Lattice Semiconductor Corporation LC51024VG-5F484C CPLDs applications.
- Custom shift registers
- Power Meter SMPS
- Cross-Matrix Switch
- Software-Driven Hardware Configuration
- DMA control
- USB Bus
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- TIMERS/COUNTERS
- Protection relays
- Parity generators
