LC51024VG-75F676I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 676-BBGA |
| Number of Pins | 676 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH™ 5000VG |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 676 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 181MHz |
| Base Part Number | LC51024 |
| Pin Count | 676 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 88kB |
| Operating Supply Current | 380mA |
| Number of I/O | 384 |
| Nominal Supply Current | 380mA |
| Memory Type | ROMless |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Programmable I/O | 132 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1024 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.6mm |
| Length | 31mm |
| Width | 31mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
LC51024VG-75F676I Overview
This network has 1024macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).676-BBGAis the package in which it resides.In this case, there are 384 I/Os programmed.It is programmed that device terminations will be 676 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is provided by a supply voltage of 3.3V volts.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.It is a type of FPGA belonging to the ispMACH? 5000VG series.There are 676 pins on the chip.When using this device, YESis also available.There are related parts in [0].If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.There are 676pins on it.There is a maximum supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A total of 132 Programmable I/Os are available.It is possible to achieve a frequency of 181MHz.There are 32 logic elements/cells to form a fundamental building block. Devices contain a 88kBmemory for storing data and programs.
LC51024VG-75F676I Features
676-BBGA package
384 I/Os
The operating temperature of -40°C~105°C TJ
676 pin count
676 pins
LC51024VG-75F676I Applications
There are a lot of Lattice Semiconductor Corporation LC51024VG-75F676I CPLDs applications.
- Digital designs
- Bootloaders for FPGAs
- Pattern recognition
- STANDARD SERIAL INTERFACE UART
- D/T registers and latches
- Cross-Matrix Switch
- Storage Cards and Storage Racks
- Digital multiplexers
- Address decoders
- Address decoding
