LC5210D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | AC DC Offline Switcher |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Frequency | 200kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Topology | Step-Down (Buck) |
| Current - Output / Channel | 800mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Max) | 400V |
| Voltage - Supply (Min) | 25V |
| RoHS Status | RoHS Compliant |
LC5210D Overview
In order to save board space, the led driver uses the 8-DIP (0.300, 7.62mm), 7 Leads package. 1 outputs are designed into LED drivers.As a mounting method, Through Hole is used.When it emerges as a AC DC Offline Switcher, it shows high-performance and reliability.If the led driver ic is set to -40°C~105°C TA, it will work normally.A frequency of 200kHz is used as the basis for operation.Under 25V voltage supply, undetermined failures may occur.Supply voltage can be set to a maximum value of 400V.
LC5210D Features
Available in the 8-DIP (0.300, 7.62mm), 7 Leads package
Operating temperature of -40°C~105°C TA
Frequency of 200kHz
LC5210D Applications
There are a lot of Sanken LC5210D LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Inspection Devices
- Panel lighting
- General lighting
- Street lighting
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- Dimmable LED for vehicle interiors
- Gallery lighting
