LC5256MB-75F256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 208 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MB |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 26mA |
| Number of I/O | 141 |
| Nominal Supply Current | 26mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 9.5 ns |
| Number of Gates | 75000 |
| Max Frequency | 300MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5256MB-75F256I Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a 256-BGA package.There are 141 I/Os on the board.The device is programmed with 256 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The device is powered by a voltage of 2.5V volts.This part is in the family [0].Package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispXPLD? 5000MBseries FPGA.A chip with 256pins is programmed.This device is also capable of displaying [0].You can find its related parts in the [0].As a building block for digital circuits, there are 75000gates.If high efficiency is desired, the supply voltage should be kept at [0].In order to store data, EEPROM, SRAMis used.This device is mounted by Surface Mount.There are 208 pins on the device.It operates at a maximum supply voltage of 2.7V volts.The device is designed to operate with a minimal supply voltage of 2.3VV.There are 8 logic elements/blocks.A total of 100Programmable I/Os are present.It is recommended that the maximal frequency be lower than 300MHz.
LC5256MB-75F256I Features
256-BGA package
141 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
208 pins
LC5256MB-75F256I Applications
There are a lot of Lattice Semiconductor Corporation LC5256MB-75F256I CPLDs applications.
- Custom shift registers
- POWER-SAVING MODES
- Random logic replacement
- Pattern recognition
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- DDC INTERFACE
- Power Meter SMPS
- Page register
- State machine design
- Configurable Addressing of I/O Boards
