LC5256MV-5FN256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 333MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 26mA |
| Number of I/O | 141 |
| Nominal Supply Current | 26mA |
| RAM Size | 16kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 75000 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5256MV-5FN256I Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with 256-BGA.In this case, there are 141 I/Os programmed.There is a 256terminations set on devices.Its terminal position is BOTTOM.It is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.It belongs to the ispXPLD? 5000MVseries of FPGAs.256pins are programmed on the chip.The device can also be used to find [0].You can find its related parts in the [0].In digital circuits, 75000gates serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].EEPROM, SRAM is adopted for storing data.Surface Mountmounts this electronic component.A voltage of 3.6V is the maximum supply voltage for this device.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A total of 100Programmable I/Os are present.This can be achieved at a frequency of 333MHz.There are 8 logic elements/cells to form a fundamental building block.
LC5256MV-5FN256I Features
256-BGA package
141 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC5256MV-5FN256I Applications
There are a lot of Lattice Semiconductor Corporation LC5256MV-5FN256I CPLDs applications.
- Power automation
- Page register
- DMA control
- LED Lighting systems
- Code converters
- State machine design
- Software-Driven Hardware Configuration
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- POWER-SAVING MODES
- Bootloaders for FPGAs
