LC5256MV-75F256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5256 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 26mA |
| Number of I/O | 141 |
| Nominal Supply Current | 26mA |
| RAM Size | 16kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 75000 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5256MV-75F256C Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with 256-BGA.There are 141 I/Os on the board.There are 256 terminations programmed into the device.Its terminal position is BOTTOM.It is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.The chip should be mounted by Surface Mount.It belongs to the ispXPLD? 5000MVseries of FPGAs.Chips are programmed with 256 pins.If this device is used, you will also be able to find [0].There are related parts in [0].As a building block for digital circuits, there are 75000gates.The supply voltage should be maintained at 3.3V for high efficiency.Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.There are 100 Programmable I/Os.In this case, 200MHzis the frequency that can be achieved.A fundamental building block consists of 8logic elements/cells.
LC5256MV-75F256C Features
256-BGA package
141 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
LC5256MV-75F256C Applications
There are a lot of Lattice Semiconductor Corporation LC5256MV-75F256C CPLDs applications.
- Portable digital devices
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- D/T registers and latches
- Dedicated input registers
- STANDARD SERIAL INTERFACE UART
- I2C BUS INTERFACE
- Wide Vin Industrial low power SMPS
- Address decoders
- Storage Cards and Storage Racks
- Custom state machines
