LC5256MV-75FN256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 208 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 26mA |
| Number of I/O | 141 |
| Nominal Supply Current | 26mA |
| RAM Size | 16kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5256MV-75FN256I Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 256-BGA package.It is programmed with 141 I/Os.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 3.3V volts.This part is in the family [0].It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Chips should be mounted by Surface Mount.In FPGA terms, it is a type of ispXPLD? 5000MVseries FPGA.With 256pins programmed, the chip is ready to use.If this device is used, you will also be able to find [0].The LC5256can be used to identify its related parts.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This device is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for it to operate.There are 8 logic elements or blocks present.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There is 200MHz frequency that can be achieved.
LC5256MV-75FN256I Features
256-BGA package
141 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
208 pins
LC5256MV-75FN256I Applications
There are a lot of Lattice Semiconductor Corporation LC5256MV-75FN256I CPLDs applications.
- Interface bridging
- Address decoding
- PLC analog input modules
- Software Configuration of Add-In Boards
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- I2C BUS INTERFACE
- Protection relays
- POWER-SAVING MODES
- I/O PORTS (MCU MODULE)
- DMA control
