LC5512MB-75FN256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MB |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5512 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 33mA |
| Number of I/O | 193 |
| Nominal Supply Current | 33mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 9.5 ns |
| Max Frequency | 275MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5512MB-75FN256I Overview
512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 256-BGA package.As a result, it has 193 I/O ports programmed.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 2.5V.It belongs to the family [0].As a result, it is packaged as Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.Chips should be mounted by Surface Mount.As part of the ispXPLD? 5000MBseries, it is a type of FPGA.Chips are programmed with 256 pins.It is also characterized by YES.Its related parts can be found in the [0].High efficiency requires the supply voltage to be maintained at [0].In this case, EEPROM, SRAMwill be used to store the data.Surface Mountmounts this electronic component.The pins are [0].In this case, the maximum supply voltage is 2.7V.With a minimal supply voltage of [0], it operates.This logic element/block contains 16logic elements.It is recommended that the maximal frequency be lower than 275MHz.
LC5512MB-75FN256I Features
256-BGA package
193 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC5512MB-75FN256I Applications
There are a lot of Lattice Semiconductor Corporation LC5512MB-75FN256I CPLDs applications.
- Random logic replacement
- Complex programmable logic devices
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Custom shift registers
- State machine control
- Handheld digital devices
- Software-Driven Hardware Configuration
- POWER-SAVING MODES
- Synchronous or asynchronous mode
- ON-CHIP OSCILLATOR CIRCUIT
