LC5512MC-75F484I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5512 |
| Pin Count | 484 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 22mA |
| Number of I/O | 253 |
| Nominal Supply Current | 22mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 9.5 ns |
| Max Frequency | 275MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5512MC-75F484I Overview
A mobile phone network consists of 512macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 484-BBGA package.As you can see, this device has 253 I/O ports programmed into it.484terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.Trayis the packaging method.To ensure reliability, the device operates at a temperature of [0].Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the ispXPLD? 5000MC series.It is equipped with 484 pin count.If this device is used, you will also be able to find [0].Its related parts can be found in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROM, SRAMis used.In this case, it is mounted by Surface Mount.A total of 484pins are provided on this board.There is a maximum supply voltage of 1.95V.It is powered by 1.65Vas its minimum supply voltage.A total of 16logic elements/blocks are present.In total, there are 256programmable I/Os.It is important to make sure that the maximum frequency is less than 275MHz.
LC5512MC-75F484I Features
484-BBGA package
253 I/Os
The operating temperature of -40°C~105°C TJ
484 pin count
484 pins
LC5512MC-75F484I Applications
There are a lot of Lattice Semiconductor Corporation LC5512MC-75F484I CPLDs applications.
- Bootloaders for FPGAs
- Timing control
- High speed graphics processing
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Configurable Addressing of I/O Boards
- STANDARD SERIAL INTERFACE UART
- I/O expansion
- ROM patching
- Programmable power management
- Multiple Clock Source Selection
