LC5512MC-75FN256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MC |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5512 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 22mA |
| Number of I/O | 193 |
| Nominal Supply Current | 22mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 9.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 275MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5512MC-75FN256C Overview
There are 512 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].As you can see, this device has 193 I/O ports programmed into it.Terminations of devices are set to [0].Its terminal position is BOTTOM.An electrical supply voltage of 1.8V is used to power it.The part belongs to Programmable Logic Devices family.Trayshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispXPLD? 5000MC series.It is equipped with 256 pin count.When using this device, YESis also available.LC5512contains its related parts.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.There are 256 pins embedded in the device.This device operates at a voltage of 1.95Vas its maximum supply voltage.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.It is recommended not to exceed 275MHzin terms of frequency.The fundamental building block consists of 16logic elements/cells.
LC5512MC-75FN256C Features
256-BGA package
193 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
256 pins
LC5512MC-75FN256C Applications
There are a lot of Lattice Semiconductor Corporation LC5512MC-75FN256C CPLDs applications.
- Software Configuration of Add-In Boards
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- TIMERS/COUNTERS
- Custom shift registers
- Software-driven hardware configuration
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Battery operated portable devices
- Software-Driven Hardware Configuration
- Power automation
- Voltage level translation
