LC5512MV-75F256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5512 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 33mA |
| Number of I/O | 193 |
| Nominal Supply Current | 33mA |
| RAM Size | 32kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5512MV-75F256I Overview
There are 512 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 256-BGA package.There are 193 I/Os programmed in it.256terminations are programmed into the device.This electrical part has a terminal position of BOTTOMand is connected to the ground.Power is supplied by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Chips should be mounted by Surface Mount.It is a type of FPGA belonging to the ispXPLD? 5000MV series.There are 256 pins on the chip.It is also characterized by YES.According to the LC5512, its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.There are 256pins on it.It operates with the maximal supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This frequency can be achieved at 200MHz.In order to form a fundamental building block, there are 16logic elements/cells.
LC5512MV-75F256I Features
256-BGA package
193 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC5512MV-75F256I Applications
There are a lot of Lattice Semiconductor Corporation LC5512MV-75F256I CPLDs applications.
- Page register
- PULSE WIDTH MODULATION (PWM)
- ROM patching
- Portable digital devices
- Preset swapping
- Battery operated portable devices
- Reset swapping
- Bootloaders for FPGAs
- Timing control
- Cross-Matrix Switch
