LC5512MV-75QN208C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5512 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 33mA |
| Number of I/O | 149 |
| Nominal Supply Current | 33mA |
| RAM Size | 32kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 176 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5512MV-75QN208C Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is packaged with 208-BFQFP.There are 149 I/Os programmed in it.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered by a voltage of 3.3V volts.It belongs to the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.Chips should be mounted by Surface Mount.The FPGA belongs to the ispXPLD? 5000MV series.In this chip, the 208pins are programmed.If this device is used, you will also be able to find [0].According to the LC5512, its related parts can be found.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.It is designed with 208 pins.It operates with the maximal supply voltage of 3.6V.A minimum supply voltage of 3V is required for it to operate.16logic elements/blocks exist.Programmable I/Os are counted up 176.This frequency can be achieved at 200MHz.
LC5512MV-75QN208C Features
208-BFQFP package
149 I/Os
The operating temperature of 0°C~90°C TJ
208 pin count
208 pins
LC5512MV-75QN208C Applications
There are a lot of Lattice Semiconductor Corporation LC5512MV-75QN208C CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- Portable digital devices
- DMA control
- Bootloaders for FPGAs
- Programmable power management
- Power Meter SMPS
- Storage Cards and Storage Racks
- Address decoding
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Multiple DIP Switch Replacement
