LC5768MB-75F256I
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 40mA |
| Number of I/O | 193 |
| Nominal Supply Current | 40mA |
| RAM Size | 48kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 24 |
| Output Function | MACROCELL |
| Number of Macro Cells | 768 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.3V~2.7V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MB |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5768 |
| Pin Count | 256 |
LC5768MB-75F256I Overview
768macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is enclosed in a 256-BGA package.There are 193 I/Os programmed in it.256terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.There is 2.5V voltage supply for this device.It is a part of family [0].Package the chip by Tray.Ensure its reliability by operating at [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispXPLD? 5000MB series.The chip is programmed with 256 pins.This device can also display [0].LC5768contains its related parts.High efficiency requires a voltage supply of [0].In order to store data, EEPROM, SRAMis used.A Surface Mountis mounted on this electronic component.A total of 256pins are provided on this board.A maximum supply voltage of 2.7Vis used in its operation.In order for it to operate, a supply voltage of 2.3Vis required.There is 200MHz frequency that can be achieved.The fundamental building block consists of 24logic elements/cells.
LC5768MB-75F256I Features
256-BGA package
193 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC5768MB-75F256I Applications
There are a lot of Lattice Semiconductor Corporation LC5768MB-75F256I CPLDs applications.
- Software-driven hardware configuration
- POWER-SAVING MODES
- Code converters
- Page register
- STANDARD SERIAL INTERFACE UART
- Preset swapping
- Power Meter SMPS
- Power automation
- Parity generators
- White goods (Washing, Cold, Aircon ,...)
