LC5768MB-75F484I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MB |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5768 |
| Pin Count | 484 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 40mA |
| Number of I/O | 317 |
| Nominal Supply Current | 40mA |
| RAM Size | 48kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 24 |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 768 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.3V~2.7V |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5768MB-75F484I Overview
In the mobile phone network, there are 768macro cells, which are cells with high-power antennas and towers.There is a 484-BBGA package containing it.It is equipped with 317I/O ports.There are 484 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 2.5V volts.This part is part of the family [0].Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.It is a type of FPGA belonging to the ispXPLD? 5000MB series.With 484pins programmed, the chip is ready to use.The device can also be used to find [0].The LC5768indicates that its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].A maximum supply voltage of 2.7Vis used in its operation.With a minimal supply voltage of [0], it operates.There are a total of 256 Programmable I/Os.You can achieve 200MHzfrequencies.In order to form a fundamental building block, there are 24logic elements/cells.
LC5768MB-75F484I Features
484-BBGA package
317 I/Os
The operating temperature of -40°C~105°C TJ
484 pin count
484 pins
LC5768MB-75F484I Applications
There are a lot of Lattice Semiconductor Corporation LC5768MB-75F484I CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Field programmable gate
- Voltage level translation
- High speed graphics processing
- I/O expansion
- Power up sequencing
- I2C BUS INTERFACE
- ON-CHIP OSCILLATOR CIRCUIT
- DMA control
- Preset swapping
