LC5768MV-5F256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5768 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 40mA |
| Number of I/O | 193 |
| Nominal Supply Current | 40mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 6 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 250MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 768 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5768MV-5F256C Overview
This network has 768macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 256-BGA package containing it.It is equipped with 193I/O ports.256terminations are programmed into the device.BOTTOMis the terminal position of this electrical part.The device is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.Package the chip by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the ispXPLD? 5000MV series.The chip is programmed with 256 pins.This device is also capable of displaying [0].The LC5768indicates that related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROM, SRAMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.There are 256 pins embedded in the device.In this case, the maximum supply voltage is 3.6V.The minimal supply voltage is 3V.Ideally, the maximal frequency should be lower than 250MHz Hz.There are 24 logic elements/cells to form a fundamental building block.
LC5768MV-5F256C Features
256-BGA package
193 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
256 pins
LC5768MV-5F256C Applications
There are a lot of Lattice Semiconductor Corporation LC5768MV-5F256C CPLDs applications.
- Bootloaders for FPGAs
- Synchronous or asynchronous mode
- Cross-Matrix Switch
- Digital systems
- LED Lighting systems
- ToR/Aggregation/Core Switch and Router
- Custom shift registers
- Portable digital devices
- DMA control
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
