LC5768MV-5FN256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5768 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 40mA |
| Number of I/O | 193 |
| Nominal Supply Current | 40mA |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 6 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 768 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5768MV-5FN256C Overview
There are 768 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A 256-BGA package contains the item.In this case, there are 193 I/Os programmed.Terminations of devices are set to [0].This electrical part has a terminal position of BOTTOMand is connected to the ground.An electrical supply voltage of 3.3V is used to power it.This part is part of the family [0].Trayshould be used to package the chip.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.FPGAs belonging to the ispXPLD? 5000MVseries contain this type of chip.It has 256pins programmed.This device can also display [0].In accordance with the [0], its related parts are listed.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 3V is required for it to operate.A logic element or block has 24elements.A total of 100 Programmable I/Os are available.It is important to make sure that the maximum frequency is less than 250MHz.
LC5768MV-5FN256C Features
256-BGA package
193 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
LC5768MV-5FN256C Applications
There are a lot of Lattice Semiconductor Corporation LC5768MV-5FN256C CPLDs applications.
- POWER-SAVING MODES
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Power Meter SMPS
- USB Bus
- Boolean function generators
- Parity generators
- Multiple DIP Switch Replacement
- Address decoding
- ToR/Aggregation/Core Switch and Router
- Programmable power management
