LC5768MV-75FN256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC5768 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 40mA |
| Number of I/O | 193 |
| Nominal Supply Current | 40mA |
| RAM Size | 48kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 7.5 ns |
| Output Function | MACROCELL |
| Number of Macro Cells | 768 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC5768MV-75FN256I Overview
There are 768 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 256-BGA package.It is equipped with 193I/O ports.Terminations of devices are set to [0].There is a BOTTOMterminal position on the electrical part in question.Power is supplied by a voltage of 3.3V volts.It is a part of family [0].Trayshould be used to package the chip.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.Chips should be mounted by Surface Mount.In FPGA terms, it is a type of ispXPLD? 5000MVseries FPGA.With 256pins programmed, the chip is ready to use.If this device is used, you will also be able to find [0].The LC5768can be used to identify its related parts.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].The electronic part is mounted by Surface Mount.A total of 256pins are provided on this board.A maximum supply voltage of 3.6Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.There are 24 logic elements or blocks present.It is possible to achieve a frequency of 200MHz.
LC5768MV-75FN256I Features
256-BGA package
193 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC5768MV-75FN256I Applications
There are a lot of Lattice Semiconductor Corporation LC5768MV-75FN256I CPLDs applications.
- Boolean function generators
- Handheld digital devices
- Configurable Addressing of I/O Boards
- Protection relays
- I/O expansion
- Bootloaders for FPGAs
- Dedicated input registers
- Pattern recognition
- Discrete logic functions
- Battery operated portable devices
