LCMXO1200C-4M132I
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 1.71V~3.465V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LCMXO1200 |
| Pin Count | 132 |
| Number of Outputs | 101 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Operating Supply Current | 21mA |
| Number of I/O | 101 |
| Nominal Supply Current | 21mA |
| Memory Type | SRAM |
| Clock Frequency | 420MHz |
| Propagation Delay | 4.4 ns |
| Programmable Logic Type | FLASH PLD |
| Number of Logic Elements/Cells | 1200 |
| Total RAM Bits | 9421 |
| Number of LABs/CLBs | 150 |
| Output Function | MACROCELL |
| Number of Macro Cells | 600 |
| Number of Dedicated Inputs | 7 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2007 |
| Series | MachXO |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | IT CAN ALSO OPERATE AT 2.5V AND 3.3V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
LCMXO1200C-4M132I Overview
The package that contains this software is called 132-LFBGA, CSPBGA. In this kind of FPGA, FLASH PLD is used. A total of 101 I/Os are programmed to ensure a more coherent data transfer. A fundamental building block is made up of 1200 logic elements/cells. It is powered from a supply voltage of 1.8V. There is a Field Programmable Gate Arrays family component in this FPGA part. An attachment Surface Mount allows the FPGA module to be attached to the development board. The supply voltage of the device is 1.71V~3.465V , at which it runs. An FPGA belonging to the MachXO series is referred to as an FPGA. While operating, the operating temperature should be kept within a range of -40°C~100°C TJ. The device has 101 outputs that are integrated into it. As a space-saving measure, this FPGA model is contained within Tray. Total terminations are 132. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 9421 bFpga chipss. In order to find related parts, you can use its base part number LCMXO1200. In this case, 132 pins are used in the design. The FPGA is built as an array of 150 latches or CLBs. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. In operation with 3.3V, designers can take advantage of its flexibility to the fullest extent. In addition to this, it has 132 pins. It usually uses a crystal oscillating at a frequency of 420MHz in order to do its work. In order to operate this device, a supply current of 21mA is used. In addition to this, it is also characteriIT CAN ALSO OPERATE AT 2.5V AND 3.3Ved by a feature called IT CAN ALSO OPERATE AT 2.5V AND 3.3V. To detect the status of input signals, there is a dedicated input which is used to detect the status of the input module. In this device, 600 Macro cells are the main building blocks of a CPLD. The SRAM memory is adopted for storing data and avoiding resource conflicts.
LCMXO1200C-4M132I Features
101 I/Os
Up to 9421 RAM bits
132 LABs/CLBs
LCMXO1200C-4M132I Applications
There are a lot of Lattice Semiconductor Corporation LCMXO1200C-4M132I FPGAs applications.
- Aircraft navigation
- Wired Communications
- DO-254
- Embedded Vision
- Random logic
- Data Center
- Digital signal processing
- Data center hardware accelerators
- Bioinformatics
- Radar and Sensors
