LCMXO2-256HC-4MG132I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | MachXO2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 269MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LCMXO2-256 |
| Number of Outputs | 56 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Memory Size | 256B |
| Operating Supply Current | 1.15mA |
| Number of I/O | 55 |
| RAM Size | 0B |
| Memory Type | FLASH |
| Propagation Delay | 7.24 ns |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 256 |
| Number of LABs/CLBs | 32 |
| Number of Macro Cells | 128 |
| Number of Logic Cells | 256 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2-256HC-4MG132I Overview
As part of the 132-LFBGA, CSPBGA package, it is included. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. Its 55 I/Os help it transfer data more efficiently. A fundamental building block contains 256 logic elements or cells. In order to operate fpga chips, a voltage supply of 2.5V volts is required. A Field Programmable Gate Arrays-series FPGA part. The Surface Mount-slot on the development board allows you to attach the FPGA module. The supply voltage of the device is 2.375V~3.465V , at which it runs. FPGAs belonging to the MachXO2 series are a type of FPGA that belong to the MachXO2 series of FPGAs. Fpga chips is necessary to keep the operating temperature wFpga chipshin -40°C~100°C TJ when the device is operating. The device has 56 outputs that are integrated into it. There is an FPGA model contained in Tray in order to conserve space. In total, there are a total of 132 terminations on fpga chips. You can find related parts by using the part number LCMXO2-256, which is its base part number. During the configuration of this FPGA module, the RAM si0Be reaches 0B to ensure that the program runs normally. In this case, 132 pins are used in the design. 32 LABs/CLBs are configured on this FPGA. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. Power is supplied to the device by a 2.5/3.3V battery. In this FPGA module, there is a memory of 256B available for storing applications and data. This device operates at a frequency of 269MHz in order to provide high efficiency. For the building block, it incorporates 256 logic cells that are used to make it work. Fpga semiconductor operates on 1.15mA of supply current. There are 128 macro cells which make up this CPLD and they serve as the main components of the device. Using FLASH memory, resources can be avoided conflicts and data can be stored efficiently.
LCMXO2-256HC-4MG132I Features
55 I/Os
132 LABs/CLBs
Operating from a frequency of 269MHz
LCMXO2-256HC-4MG132I Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2-256HC-4MG132I FPGAs applications.
- Device controllers
- Medical ultrasounds
- Wireless Communications
- Secure Communication
- Aerospace and Defense
- Industrial Ethernet
- Data Center
- ADAS
- Software-defined radio
- Filtering and communication encoding
