LCMXO2-256HC-4SG32C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-UFQFN Exposed Pad |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | MachXO2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | QUAD |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LCMXO2-256 |
| Number of Outputs | 22 |
| Operating Supply Voltage | 3.3V |
| Memory Size | 256B |
| Operating Supply Current | 18μA |
| Number of I/O | 21 |
| RAM Size | 0B |
| Memory Type | FLASH |
| Number of Inputs | 22 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 256 |
| Max Frequency | 269MHz |
| Number of LABs/CLBs | 32 |
| Number of Macro Cells | 128 |
| Number of Logic Cells | 256 |
| Height Seated (Max) | 0.6mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2-256HC-4SG32C Overview
Fpga chips is supplied in the 32-UFQFN Exposed Pad package. There are FIELD PROGRAMMABLE GATE ARRAY transistors in this type of FPGA. A total of 21 I/Os are programmed to ensure a more coherent data transfer. To form a fundamental building block, there are 256 logic elements/cells. The supply voltage is 2.5V volts. The Field Programmable Gate Arrays family of FPGA parts includes this part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. Fpga chips operates at a voltage of 2.375V~3.465V and uses a battery to supply power. The FPGA belongs to the MachXO2 series of FPGAs, and it is one type of FPGA. Fpga chips is important to maintain the operating temperature wFpga chipshin the range of 0°C~85°C TJ when operating the machine. There are 22 outputs incorporated in this device. In order to save space, this FPGA model has been contained in Tray. In total, it has 32 terminations on each end. If you are looking for related parts, you can use the base part number LCMXO2-256 as a starting point. This FPGA module has a RAM si0Be of 0B that is sufficient to make sure that the program is able to run normally. A total of 32 LABs/CLBs make up this FPGA array. In my opinion, this FPGA could produce fantastic results if mounted in Surface Mount, provided that its specifications are followed. In operation with 3.3V, designers can take advantage of its flexibility to the fullest extent. There is a memory of 256B embedded in this FPGA module, which can be used for storing programs and data. As far as the speed of this FPGA is concerned, it can get up to 269MHz. It incorporates 256 logic cells used for the building block. In order to operate this device, a supply current of 18μA is used. In this device, the main building blocks of a CPLD are 128 macro cells, which serve as the main components of the device. Data is stored in the FLASH memory, so resource conflicts are avoided.
LCMXO2-256HC-4SG32C Features
21 I/Os
LCMXO2-256HC-4SG32C Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2-256HC-4SG32C FPGAs applications.
- Industrial IoT
- Automotive Applications
- Aerospace and Defense
- Solar Energy
- Telecommunication
- Digital signal processing
- Broadcast
- Software-defined radio
- Ecosystem
- Data center hardware accelerators
