LCMXO2-256ZE-1SG32C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-UFQFN Exposed Pad |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | MachXO2 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LCMXO2-256 |
| Number of Outputs | 22 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 256B |
| Operating Supply Current | 18μA |
| Number of I/O | 21 |
| RAM Size | 0B |
| Memory Type | FLASH |
| Number of Inputs | 22 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 256 |
| Max Frequency | 104MHz |
| Number of LABs/CLBs | 32 |
| Number of Macro Cells | 128 |
| Number of Logic Cells | 256 |
| Height Seated (Max) | 0.6mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2-256ZE-1SG32C Overview
The package that contains this software is called 32-UFQFN Exposed Pad. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. The device has 21 I/O ports for more coherent data transfer. In order to construct a fundamental building block, 256 logic elements/cells are required. In order to operate fpga chips, a voltage supply of 1.2V volts is required. There is a Field Programmable Gate Arrays family component in this FPGA part. FPGA modules can be attached to development boards using a Surface Mount-connector. In order to operate it, it requires a voltage supply of 1.14V~1.26V . An FPGA belonging to the MachXO2 series is referred to as an FPGA. Operating temperatures should be maintained within the 0°C~85°C TJ range at all times when the unit is in use. There are 22 outputs incorporated in this device. There is an FPGA model contained in Tray in order to conserve space. In total, the terminations of this piece are 32. You can find related parts by using the part number LCMXO2-256, which is its base part number. For the program to work properly, the RAM si0Be of this FPGA module must reach 0B GB in order to ensure normal operation. This FPGA is built as an array of 32 LABs/CLBs. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. A 1.2V-volt supply allows designers to fully utilize its flexibility. Data and programs can be stored in this FPGA module's 256B memory. As far as the speed of this FPGA is concerned, it can get up to 104MHz. For the building block of this system, 256 logic cells are included. Fpga semiconductor operates on a 18μA power supply. A CPLD is essentially composed of 128 macrocells, which are the main building blocks of a CPLD. This memory is designed for storing data and avoiding resource conflicts.
LCMXO2-256ZE-1SG32C Features
21 I/Os
LCMXO2-256ZE-1SG32C Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2-256ZE-1SG32C FPGAs applications.
- Data Center
- Consumer Electronics
- Software-defined radios
- Automotive advanced driver assistance systems (ADAS)
- DO-254
- Aerospace and Defense
- Enterprise networking
- Medical imaging
- Data center search engines
- Software-defined radio
