LCMXO2-256ZE-1UMG64C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFBGA |
| Number of Pins | 64 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | MachXO2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Frequency | 104MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LCMXO2-256 |
| Number of Outputs | 45 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 256B |
| Operating Supply Current | 18μA |
| Number of I/O | 44 |
| Propagation Delay | 10.21 ns |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 256 |
| Number of LABs/CLBs | 32 |
| Number of Macro Cells | 128 |
| Number of Logic Cells | 256 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2-256ZE-1UMG64C Overview
This package is included in the 64-VFBGA package and is available for purchase. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. There are 44 I/Os for better data transfer. To form a fundamental building block, there are 256 logic elements/cells. In order for the device to operate, a supply voltage of 1.2V volts needs to be provided. There is a Field Programmable Gate Arrays family component in this FPGA part. This FPGA module can be attached to the development board with a Surface Mount. The supply voltage of the device is 1.14V~1.26V , at which it runs. An FPGA belonging to the MachXO2 series is referred to as an FPGA. Operating temperatures should be maintained within the 0°C~85°C TJ range at all times when the unit is in use. There are 45 outputs incorporated in this device. As a result of space limitations, this FPGA model has been included in Tray. As a whole, it has 64 terminations. If you are looking for related parts, you can use the base part number LCMXO2-256 as a starting point. In this case, there are 64 pins on the board. An array of 32 LABs/CLBs is built into the FPGA. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. In operation with 1.2V, designers can take advantage of its flexibility to the fullest extent. There is a memory of 256B embedded inside this FPGA module that can be used to store programs and data. This device operates at a frequency of 104MHz in order to provide high efficiency. During the construction of the building block, there are 256 logic cells used. During operation, it uses 18μA of supply current. A CPLD consists of 128 macro cells which are the building blocks that make up an electronic device.
LCMXO2-256ZE-1UMG64C Features
44 I/Os
64 LABs/CLBs
Operating from a frequency of 104MHz
LCMXO2-256ZE-1UMG64C Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2-256ZE-1UMG64C FPGAs applications.
- Medical Applications
- Aircraft navigation
- DO-254
- Military DSP
- Camera time adjustments
- Space Applications
- Scientific Instruments
- Aerospace and Defense
- Voice recognition
- Solar Energy
