LCMXO2280E-3MN132C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | MachXO |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LCMXO2280 |
| Pin Count | 132 |
| Number of Outputs | 101 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Operating Supply Current | 20mA |
| Number of I/O | 101 |
| Nominal Supply Current | 20mA |
| Memory Type | SRAM |
| Propagation Delay | 5.1 ns |
| Programmable Logic Type | FLASH PLD |
| Number of Logic Elements/Cells | 2280 |
| Total RAM Bits | 28262 |
| Max Frequency | 500MHz |
| Number of LABs/CLBs | 285 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1140 |
| Number of Dedicated Inputs | 7 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2280E-3MN132C Overview
There is a 132-LFBGA, CSPBGA package that includes this component. The FLASH PLD-series of FPGAs are composed of this type. This device features 101 I/Os in order to transfer data in a more efficient manner. Logic blocks consist of 2280 logic elements/cells. The supply voltage is 1.2V volts. FPGA parts like this belong to the Field Programmable Gate Arrays family. By attaching the Surface Mount connector, you can use this FPGA module with your development board. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the MachXO series of FPGAs. The operating temperature should be kept at 0°C~85°C TJ when operating. There are 101 outputs incorporated in this device. It is for space saving reasons that this FPGA model is contained in Tray. Fpga chips is designed wFpga chipsh 132 terminations. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 28262 bFpga chipss. If you are looking for related parts, you can use the base part number LCMXO2280 as a starting point. There are 132 pins on this device. An array of 285 LABs/CLBs is built into the FPGA. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. A 1.2V-volt supply allows designers to fully utilize its flexibility. As far as the pin count is concerned, it has 132 pins. In fact, this FPGA is capable of reaching a speed of 500MHz. Fpga semiconductor operates on a 20mA power supply. It has 7 dedicated inputs in which the status of the signals on the input is detected. There are 1140 macro cells which make up this CPLD and they serve as the main components of the device. Using SRAM memory, resources can be avoided conflicts and data can be stored efficiently.
LCMXO2280E-3MN132C Features
101 I/Os
Up to 28262 RAM bits
132 LABs/CLBs
LCMXO2280E-3MN132C Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2280E-3MN132C FPGAs applications.
- Random logic
- Embedded Vision
- Computer hardware emulation
- Medical Applications
- Broadcast
- Bioinformatics
- Automotive driver's assistance
- Wireless Communications
- Consumer Electronics
- Electronic Warfare
