LCMXO2280E-3MN132I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | MachXO |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LCMXO2280 |
| Pin Count | 132 |
| Number of Outputs | 101 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Operating Supply Current | 20mA |
| Number of I/O | 101 |
| Nominal Supply Current | 20mA |
| Memory Type | SRAM |
| Propagation Delay | 5.1 ns |
| Programmable Logic Type | FLASH PLD |
| Number of Logic Elements/Cells | 2280 |
| Total RAM Bits | 28262 |
| Max Frequency | 500MHz |
| Number of LABs/CLBs | 285 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1140 |
| Number of Dedicated Inputs | 7 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2280E-3MN132I Overview
In the 132-LFBGA, CSPBGA package, you will find fpga chips. This kind of FPGA is composed of FLASH PLD. Fpga chips is programmed wFpga chipsh 101 I/Os for transferring data in a more coherent manner. Logic elements/cells form the fundamental building block of a computer. Supply voltage is 1.2V volts. In this case, the FPGA part belongs to the Field Programmable Gate Arrays family. With a Surface Mount connector, this FPGA module can be attached to the development board. This device is powered by a 1.14V~1.26V battery. An FPGA belonging to the MachXO series is referred to as an FPGA. When operating the machine, it is important to keep the temperature within -40°C~100°C TJ range. During the installation of this device, 101 outputs were incorporated. As a result of space limitations, this FPGA model has been included in Tray. Total terminations are 132. This device is equipped with 28262 RAM bits in terms of its RAM si28262e. LCMXO2280 is the base part number that can be used to identify related parts. 132 pins are designed into the device. 285 LABs/CLBs are configured on this FPGA. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. In the case of 1.2V supply voltage, designers can take full advantage of its flexibility. This device has a pin count of 132 in fpga semiconductor. This FPGA can get as fast as 500MHz. There is a 20mA supply current used in its operation. To detect the status of input signals, there is a dedicated input which is used to detect the status of the input module. A CPLD is essentially composed of 1140 macrocells, which are the main building blocks of a CPLD. Using SRAM memory, resources can be avoided conflicts and data can be stored efficiently.
LCMXO2280E-3MN132I Features
101 I/Os
Up to 28262 RAM bits
132 LABs/CLBs
LCMXO2280E-3MN132I Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2280E-3MN132I FPGAs applications.
- Scientific Instruments
- Automotive Applications
- Space Applications
- Integrating multiple SPLDs
- Medical ultrasounds
- Aircraft navigation
- Industrial Ethernet
- Automotive advanced driver assistance systems (ADAS)
- Secure Communication
- Military DSP
