LCMXO2280E-5T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | MachXO |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LCMXO2280 |
| Pin Count | 100 |
| Number of Outputs | 73 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Operating Supply Current | 20mA |
| Number of I/O | 73 |
| Nominal Supply Current | 20mA |
| Memory Type | SRAM |
| Propagation Delay | 3.6 ns |
| Programmable Logic Type | FLASH PLD |
| Number of Logic Elements/Cells | 2280 |
| Total RAM Bits | 28262 |
| Max Frequency | 600MHz |
| Number of LABs/CLBs | 285 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1140 |
| Number of Dedicated Inputs | 7 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LCMXO2280E-5T100C Overview
In the 100-LQFP package, you will find fpga chips. Fpga chips consists of FLASH PLD elements. Having 73 I/Os makes data transfers more coherent. To form a fundamental building block, there are 2280 logic elements/cells. Supply voltage is 1.2V volts. There is a Field Programmable Gate Arrays family component in this FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the MachXO series of FPGAs. The operating temperature should be kept at 0°C~85°C TJ when operating. In this device, 73 outputs are incorporated in order to provide you with maximum flexibility. Fpga chips is designed to maximiTraye space efficiency by containing the FPGA model in Tray. As a whole, it has 100 terminations. The RAM bits that this device offer is 28262. LCMXO2280 is the base part number that can be used to identify related parts. 100 pins are designed into the device. An array of 285 LABs/CLBs is built into the FPGA. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. Design engineers can fully take advantage of its flexibility when operating at 1.2V supply voltage. I am going to present you with a device that is equipped with 100 pins. As far as the speed of this FPGA is concerned, it can get up to 600MHz. A 20mA supply current is used for its operation. To determine the status of the input signals, 7 dedicated inputs are available in the system. The main component of a CPLD is a set of 1140 macrocells that form the foundation for the device. The SRAM memory is optimiSRAMed for data storage and resource management.
LCMXO2280E-5T100C Features
73 I/Os
Up to 28262 RAM bits
100 LABs/CLBs
LCMXO2280E-5T100C Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2280E-5T100C FPGAs applications.
- Electronic Warfare
- Enterprise networking
- Medical Electronics
- Device controllers
- Medical ultrasounds
- OpenCL
- Wired Communications
- Distributed Monetary Systems
- DO-254
- Industrial,Medical and Scientific Instruments
