LED1642GWPTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | LED1642 |
| Number of Outputs | 16 |
| Max Output Current | 40mA |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 10mA |
| Output Current | 40mA |
| Max Supply Current | 10mA |
| Max Output Voltage | 20V |
| Voltage - Output | 19V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 40mA |
| Min Output Voltage | -500mV |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Max Input Voltage (DC) | 5.5V |
| Min Input Voltage (DC) | 3V |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.48mm |
| Length | 8.76mm |
| Width | 4.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LED1642GWPTR Overview
The 24-SSOP (0.154, 3.90mm Width) package conserves board space. In this LED driver, there are 16 outputs.The led driver mounting is done by using Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.Signage has significant advantages.In this case, there are 24 terminations.Its configuration is based on 24 pins.There are estimated to be 16 segments.It's mounted by Surface Mount.It is under the base part number LED1642 that the LED driver can be found.The supply voltage of 5.5V is an acceptable maximum value.The output voltage of the device is 19V.This device requires a minimum voltage of 3V volts.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.There is 5.5V maximum value for supply current.As long as the maximum supply current is less than 10mA, this device is capable of providing high efficiency.A load can be supplied with 40mA current.There is 3.3V internal voltage required to power systems.It's possible for this electronic component to fully function when the switching frequency is maintained at 30MHz.At maximum output current 40mA, it will deliver all the benefits of a LED driver.It is recommended that the output voltage be no higher than 20V.It maintains a -500mV minimum voltage output.
LED1642GWPTR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Operating with the supply voltage of 3.3V
Switching frequency of 30MHz
LED1642GWPTR Applications
There are a lot of STMicroelectronics LED1642GWPTR LED Driver ICs applications.
- Architectural lighting
- Sports Facility Lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- Stage and Studio lighting
- General lighting
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Linear fluorescent
