LED1642GWXTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LED1642 |
| Number of Outputs | 16 |
| Max Output Current | 400mA |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 5.5V |
| Output Current | 40mA |
| Max Supply Current | 10mA |
| Max Output Voltage | 19V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 40mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Max Input Voltage (DC) | 5.5V |
| Min Input Voltage (DC) | 3V |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.3V |
| Height | 1.05mm |
| Length | 7.9mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LED1642GWXTTR Overview
Additionally, there is a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package for saving space.This LED driver has 16 outputs.Mounting is done according to the Surface Mount method.As a Linear, it has high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Signage has many advantages.In this case, there are 24 terminations.To form its configuration, 24 pins are used.The segment count is 16.There is a mounting of it by Surface Mount.LED drivers have a base part number of LED1642.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.It operates with the minimal input voltage of 3V.The allowable maximum value of supply current reaches 5.5V.It is capable of delivering high efficiency when the maximal supply current is below 10mA.40mA is the maximum current the load can handle.The internal voltages needed to power systems is 3.3V.Having the switching frequency at 30MHz enables this electronic component to perform at its best.LED drivers deliver all their benefits with a maximum output current of 400mA.If the output voltage exceeds 19V, it should be corrected.
LED1642GWXTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Operating with the supply voltage of 3.3V
Switching frequency of 30MHz
LED1642GWXTTR Applications
There are a lot of STMicroelectronics LED1642GWXTTR LED Driver ICs applications.
- Portable lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage and Studio lighting
- LED headlights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- High-end retail lighting
- Museum lighting
- Other Electronic Devices
- Gallery lighting
